✨Custom Air Toa !✨

✨Combat mech and pilot ! ✨

Closeups and lore under the cut !

Side and back closeups :

Minfig closeup :

So, lore I said.

Welcome on Earth, in a nearish future. WW3 happened, but after that, everything is going absolutely fine ! Lot of tasks are automated, no one had to work anymore, and thus, humanity worldwide become a society of entertainment. Films, videos, games, you name it. But of course, games are not 'real' enough, so some streaming platforms organised life-sized fighting games with giant machines. That couldn’t go wrong, right ? Right, in fact, a world-wide tournament was made, with always much complete arenas, and billions of watchers.

So, about this mech — and its pilot, too. This one is part of the original cast of the mech battles, a beautiful Mark One. All of them were the same, originally, with only colours to distinguish them.

Its pilot, skilled as he was, won the first season. Survived the second. And the third. And so, eventually, this one became the last one of the Mark Ones. And it won again, awarding enough of a prize for the pilot to upgrade it. It was also renamed Relic by the crowd.

Fully reworked, for the next season, Relic has been updated with a plasma beam and a heavy rotator cannon, fuelled by a large tank located on its back — if any other competitors ever attain this place.

With this upgrade, the commands, too, have been updated, with controllers now having holo-projections, and a much faster update rate. One has to imagine that these mechs were originally controlled in large rooms (similar to Jaeger command centers), but have been rendered light enough to be added to a living room, for amateurs. The pilot, however, did not change his original headset and suit, which is full of old equipments and souvenirs.

That’s it for this one, expect one of Relic’s competitors next week : Quake !

✨Pride clones !✨

As I mentioned somewhere in my previous post (I think ?) I found my clones missing colours. So I did a rainbow Cody, and things went downhill from here.

There's not much to say about it built-wise that I haven't already said, but a few mentions of my colour palette might be interesting, notably some shade of 'rubber' materials, for a few of the purples. Also, there aren't nearly enough blue-green shades to satisfy my needs, but I can't do much about it.

You may also ask for other flags, who knows how they'll look...

Speaking of, the flags here have nothing to do with any headcannons or whatnot, they're purely aesthetic - or practical, since some colour subdivisions are easier to represent on some models than on others.

✨Looks To The Moon✨ [1/2]

Where do I even start with that ? Oh, yeah. It’s not done just yet (if that wasn’t obvious enough).

Though, I won’t have the opportunity to work on it for a while, so I figured I might as well share the progress.

Obviously, I’m missing the water; and an outside — as well as a few other things I’ll mention somewhere below (along with closeups and way too many details, as always).

If you don’t care about any of that, you could still check up my silly little FP there !

Lots, lots of things to talk about here…

(Structure first, feel free to skip to the first actual close up if you consider that as boring.)

First of all, here is an edited version of the first pic, with water :

Looks much better already. And although it might prove complicated, I have a plan. Sort of. Because Lego has this really cool, transparent blue piece which they produced a lot of : folding garage doors. They’re everywhere on firefighter sets, and they’re really wide. With a few tricks, they might work.

As for the outside, well…I’m not there just yet. I’ll try to cover it up with some Iterator-esque pattern, I suppose.

I’m also missing a scug ! I absolutely want one, and given how I chose to represent the scene, it won’t be Saint nor Spears (shame). Rivulet is really tempting, but it might make too much blue; currently, my choice might be on Monk, to have sufficient contrast (and Monk is cute). Though I might change that, depending on how much small yellow pieces I have.

Now, before talking about the inside, let’s take a peek at the outside :

Here it is (back side, specifically). It’s a bit of mess because of the technics im using — which I’ll come to in just a seconds — but I also find it oddly fitting with the Iterators theme. The blacks on each sides are holding the cube together, and the technic bars in the middle are ensuring everything is held together — and also compensating for the weight of the top plate, kind of like how I did with my Carrion MOC a while back.

Anyway, the Technic™️.

The one thing which I find striking in Iterators cans is the tiling (14x14 from my last count), and it’s not that easy to replicate through Lego. Either you have no gap at all, and you use only the tiles’ grove as a separation (which, here, is way too small) or you make them very far apart, which looks terrible here). However, my tiling technic here is (not entirely mine) usually something you’d see to make floors, especially castels.

Here, I have three layers : the dark grey layer, which is the base; the light gray, which is the tiles; and, in between, I have a layer of black dots forming a grid diagonally to the first layer, on which the tiles are placed. This diagonality explains why, on the pic above, my plates have so much spiky edges, and which I have to use this whole complicated system to hold everything together.

Of course, it gets worse ! Because the cans are not perfect cubes, the edges are bevelled. And so I bevelled. Now, with all these intricacies, there was no way any regular connection would keep these edges in place. You can also spot what I used instead, which is an awful lot of ball and socket joints (mixel style). Incredibly useful, those pieces.

Anyway, enough boring structural details, here come the fun part !

Small things first, here is a comparison of the first vs final design for the neuron flies :

I’m really glad I actually managed to do that — they’re an important element, and the conception had me worried for a little bit.

The first design is, in my opinion, the best one can make at this scale. Slight issue : it’s not actually physically possible to make it hold together. After a lot of different iterations (ah !) I’m came up with the design on the right. It’s a bit more square, but it has a distinct head and floppy tails, which was all I was asking for. Obviously, the two tooth pieces I’m using are hardly held at all (using a mod 1x1 joint piece). There’s also, behind, a white dot with a hole, which ensures that these can be connected to the background via the long, transparent bars. Wasn’t easy to stick them without breaking them, and there’s no way I’m touching these now.

Her. She is the central piece of my MOC after all. It took me a while to figure out the design (mostly the head), but I’m glad of how it turned out. It’s not perfect, of course, but I feel like it works well, both scale-wise and color wise. And there’s only one (two) illegal connections, for the antennas which I’m making using hands. It’s very tempting to draw her a face — I’ll probably consider it, at some point.

The arm behind is also relatively good, with loose cables hanging from it. Once again, ball and socket joints are here to save the day; although I do feel like some parts of it are a little bulky, and it doesn’t drop down low enough…

Additional details, the piles of debris.

It’s…really difficult to make debris which don’t look purpose, and aren’t simply horrendous to look at. I tried to keep some grey tones, but also incorporated some brown, because it does actually bring some well needed contrast to the whole scene; and a few plants.

Speaking of plants, I’m no really liking these vines hanging from the ceiling (much thinner and darker in game), but as far as my expertise go, I dont see another way to get them here — and if there’s nothing at all, the whole piece suddenly gets really dull. Of course, there’s also the gap in the ceiling, with cables falling out; this, I will add more details to later on — and I have the hope to get a proper light source to go through it and act as a sun which will fall directly on my small LttM.

To conclude, here are final views of it, from further away, and with a brick separator from scale. It does look quite flimsy, doesn’t it ?

Oh, and, well. I’ve been messing with Dots recently. Figured this was worth including as a footer (probably on of the first achievements I unlocked — poor Moon~).

✨Quetza and its pilots !✨

Another combat mech ! And I have more in stock~ (See previous work here)

…and of course closeups and lore under the cut :}

Pilot closeups :

Mech closeups :

Lore !

(All the world’s lore can be found in the first of these posts)

So, this mech is quite impressive, notably because it’s one of the only of the arena featuring four arms ! Quite a complex model to handle, but devastating when mastered. Quetza’s been designed by the two sisters who pilot it.

This, too is unusual, because there’s usually only one pilot — two would require an extreme coordination. But the controls have been modified (you can see the controllers in the hands of the pilot, featuring controls on both sides of the objects, while most controllers only have one). These control the essential of the mech’s basic movements, and require to be very dexterous. The pilot using these is the one considered as the 'true' pilot, contrarily to here sister, who acts as a technic team on her own (hence why only of them wear something cool, and the other plain black clothes). But the so-called technical support is actually completely part of the mech’s piloting, because the holoscreen paired with a lone controller help to automate sword combos and general coordination.

Speaking of the swords, they obviously aren’t made of gold, but a good paint job after each battle can help fix that. This type of weapon caused some problems at the start of Quetza’s career, because without them, the mech was defenceless. This have been fixed with magnetic locks, which hold the swords in place while allowing flexibility.

And next time : …I don’t actually have a name for that one yet, you’ll have to wait-

The swords are also a hassle in real life, because they’re only connected to the hands through a meh illegal technic. You can barely see it on the first image, but they are connected to the back finger using a small claw/tooth, which does the job, but nothing more.

Also, I can’t fathom what set all the plates featuring stickers are coming from, if anyone has a lead, please tell me.

Finally, taking the first picture took me about 15 minutes because there was no angle that could reflect what I actually saw, which was terrible.

Bonus, because you held on until there :

Photo of Quetzal from my former shelf studio, not cropped, and with terrible focus (feel the pain I feel when I realise later that this is a terrible photo~)

✨Trans pride flag !✨

Had some inspiration and a nice motivation (here)

(See previous work here)

Alt version below the cut :

Pastel version ! It looks a bit bland because I didn’t have enough pieces to make enough variations (this type of pink is exactly what I needed, but also happens to be very hard to find). It’s probably more fitting for the actual flag compared to the one above, which is very neon-y (and I tuned it down a bit, it could be much worse brighter than it is now). But the above version looks better, I admit, and it give a bit of peps in the middle of all my other works, too, because of the unique colors.

A little replica of a wakeboard ski-lift I made as a present for a friend ! (Other views below)

The system is a little sturdy but it does the work, and the different white modules work as more than simply decoration !

(Sorry for the bad quality of that video-)

✨ Small lego diorama of some ARFs of the 91st ! ✨

This is of course from the Clone Wars — expect much more of these in the upcoming weeks, it’s one of my favourite themes :}

(Closeups, commentaries and complaints under the cut)

These trees are pretty experimental, I usually use classic leaves rather than plain plates, but these were interesting, and were a pretty fun challenge (I like making trees a lot, so there are usually some in most of my dioramas). This is supposedly based on Kashyyk, but most of the trees there are waaay too big for me; however I found some nice pieces for the roots (the large ones in the middle, which are not really visible, are using Lego Elves’ dragon horns; and there are also some old palm trees trunks, which are really awesome pieces to use.)

This is probably gonna be the only one for the 91st though, because I don’t have much more of these. The only other possibility of that would be Neyo’s execution of o66 (not fun~).

Also, the night effect on the closeups is due purely to one of my led lighting dying in my hands, which wasn’t exactly practical.

Your lego pride flags are so cool! I love them! <3

I’m very late because I didn’t see this before (I’m not sure of how, but well…), but thanks a lot ! I will definitely continue to make some of these, and I do have some potential inspiration for one very soon~

Here’s my take on a batch of custom Nexo Knights minifigs !

Closeups and thoughts under the cut

So, in no particular order, the closeups, with comments and comparisons with the actual characters from the original Lego theme (also, because of Tumblr’s image limits, I had to badly stitch together my pictures, sorry-)

1) Mace

Pretty cool one, and the only girl in the team in the original cast, who also happen to have troubles because her dad is the king. But eh, none of that here, so she get the cool cloak I assign to any cool red character I can find (yes, you’ll see it again many times in the future). The overall design is pretty nice (mostly this face, the other one on the brick is not as good; the printed armor, which is from season 4, is pretty nice, and does a nice job with the large dark piece (coming from later Hero Factory sets). The weapons are from the Chima theme (and so is the cloak !). The hairs are from the only Tron set, which should have been continued as whole theme but eh-

2) Axel

Stupid and muscular originally. Well, now he’s got a Large Axe (Bionicle) to stand to his name. The helmet is all Nexo, but with some custom brew of mine, and so is the shield. Also, the custom arm was possible because the large chest has a technic pin.

3) Clay(more)

Not room much modifications on the base character (s1). The sword is from a season four version of the character, the shield is homemade with some fun pieces I had lying around. The two arms are modified from the Ultimate set. …which I transformed in guns…Yeah.

4) Aaron

Green ! Always had a cooler weapon. The armor is from the mech set, the chest piece is from s3-4, the Google’s are from the Ultimate set, and the shoulder thingy is from Boba Fett. I kept the original shield with some added pieces, which is made to fly (like with the original al character) but changed the face to give him a more serious expression. The weapon is mostly from the original crossbow, with some nice twists (the beam on the first image is from a ninjago sword).

5) Lance Whatever their name is now

Really a bad character : rich, 'very pretty', egocentric. So, well…I took the armor and made an entire new one. I really like them, but it might be because it took an awful lot of time to figure out the weapon (transparent white piece similar to the green beam mentioned above). Armor-wise, it’s s1 body, with a grey pauldron (Clone Wars) and a light grey kama (…Also Clone Wars). The hairs are a really cool piece from a Ninjago set, and the head…Come from a City ski set. But the orange visor makes it work !

6) Never remembered the name of that one

Original character is a very smart kid with not much development in the show. Well, firstly I made him an adult (legs are from a black widow figure), and then I decided to push the technical side a little. So, full suit with crystal swords, which works ! Most pieces are actually from the theme, except the red dots (Ninjago again), the crystals in the back (Power Mine [really a cool theme !]), and the helmet (City firefighters + Ninjago…again). It was the first one I made, which made me do the others.

I might get them in a diorama at some point, to set them against the very many custom monsters from the same theme (which were already much cooler than the original minifigs). In fact, most of the theme was really cool, the two sad points are that it was discontinued, and the TV show was…Well, it didn’t push much sci-fi nor fantasy, so I had to do the job.

Now, with that post I have finally revealed my three favorites things to do with legos : Dioramas, Big Mechs, and Custom minifigures (plus any Clone Wars related stuff, but it’s probably just as much because of the fandom aspect as it is the Lego aspect). One day perhaps, I’ll get all three of these aspects in one epic scene, but I have no idea of how for now, so maybe later~

✨Aroace Door Tag✨

‘Name' looks really terrible, but couldn’t just put my real name here-

In hindsight, Sample might have been better. Anyway, if you want to get something like that yourself and are struggling with the letters, my dms are open — or asks even, if you’re feeling bold-

And of course, studio closeups bellow the cut

With, and without 'name' (M is really a terrible letter because of how wide it is, though now that I’m writing this, I know how I could have done it better. Well, too late.)