Lokarprincipal - Conhecimento é Poder

Sewing Machines & Planned Obsolescence

I've got these two sewing machines, made about 100 years apart. An old treadle machine from around 1920-1930, that I pulled out of the trash on a rainy day, and a new Brother sewing machine from around 2020.

I've always known planned obsolescence was a thing, but I never knew just how insidious it was till I started looking at these two side by side.

I wasn't feeling hopeful at first that I'd actually be able to fix the old one, I found it in the trash at 2 am in a thunderstorm. It was rusty, dusty, soggy, squeaky, missing parts, and 100 years old.

How do you even find specialized parts 100 years later? Well, easily, it turns out. The manufacturers at the time didn't just make parts backwards compatible to be consistent across the years, but also interchangeable across brands! Imagine that today, being able to grab a part from an old iPhone to fix your Android.

Anyway, 6 months into having them both, I can confidently say that my busted up trash machine is far better than my new one, or any consumer-grade sewing machine on the market.

Old Machine Guts

The old machine? Can sew through a pile of leather thicker than my fingers like it's nothing. (it's actually terrifying and I treat it like a power tool - I'll never sew drunk on that thing because I'm genuinely afraid it'd sew through a finger!) At high speeds, it's well balanced and doesn't shake. The parts are all metal, attached by standard flathead screws, designed to be simple and strong, and easily reachable behind large access doors. The tools I need to work on it? A screwdriver and oil. Lost my screwdriver? That's OK, a knife works too.

New Machine Guts

The new machine's skipping stitches now that the plastic parts are starting to wear out. It's always throwing software errors, and it damn near shakes itself apart at top speed. Look at it's innards - I could barely fit a boriscope camera that's about as thick as spaghetti in there let alone my fingers. Very little is attached with standard screws.

And it's infuriating. I'm an engineer - there's no damn reason to make high-wear parts out of plastic. Or put them in places they can't be reached to replace. There's no reason to make your mechanism so unbalanced it's reaching the point of failure before reaching it's own design speed. (Oh yeah there is, it's corporate greed)

100 years, and your standard home sewing machine has gone from a beast of a machine that can be pulled out of the literal waterlogged trash and repaired - to a machine that eats itself if you sew anything but delicate fast-fashion fabrics that are also designed to fall apart in a few years.

Looking for something modern built to the standard that was set 100 years ago? I'd be looking at industrial machines that are going for thousands of dollars... Used on craigslist. I don't even want to know what they'd cost new.

We have the technology and knowledge to manufacture "old" sewing machines still. Hell, even better, sewing machines with the mechanical design quality of the old ones, but with more modern features. It would be so easy - at a technical level to start building things well again. Hell, it's easier to fabricate something sturdy than engineer something to fail at just the right time. (I have half a mind to see if any of my meche friends with machine shops want to help me fabricate an actually good modern machine lol)

We need to push for right-to-repair laws, and legislation against planned obsolescence. Because it's honestly shocking how corporate greed has downright sabotaged good design. They're selling us utter shit, and expecting us to come back for more every financial quarter? I'm over it.

Esse tá fora dos trilhos.

Se ao menos ele tivesse prestado mais atenção ás aulas de física.

Miscatculation.

relaxing moment

How to learn a language the fun (and easy) way:

1 - Watch native films/dramas

This is not only fun, but will also help your ears adjust to the speed and tones of native speakers. You will start to differentiate individual words and sounds. This is not a voice over or language teacher speaking - these are natives who speak rapid-fire, and with lots of slang thrown in. You'll also learn about the country's culture, etiquette rules and general way of life.

Matt vs Japan (YouTube) learnt Japanese through watching anime. You can also learn through native resources like manga. And this is how babies learn naturally - through an endless stream of language input. Eventually they recognise word, intonation and grammar patterns.

For free Korean/Japanese/Chinese dramas check out Viki, or you can find a variety of languages on Netflix, or even YouTube (good for Russian ones!)

2 - Find a translated version of books/films

If you know a book series by heart, find the translated version and go through them slowly. Since you already know the plot, you'll associate new words with their meanings much faster. You can also do this with films you've watched repeatedly, like the Disney classics.

3 - Chat with natives

Use apps like HelloTalk, Tandem or Hilokal to chat (for free!) with native speakers around the world. Honestly, this is the fastest way to learn, especially because they use everyday expressions/slang. It's also the most fun way because you're essentially just making foreign friends.

4 - Browse the internet in your TL

YouTube, twitter, Tumblr, forums, whatever. Google a recipe in Spanish. Check the news in German. Create a YouTube account specifically for Arabic. You can also make Spotify playlists in your TL, and listen to them instead of your usual native ones.

5 - Create content

Compose a song

Keep a diary

Start a blog

Create a YouTube channel

Write a passionate essay

Write a short story

...in your target language.

6 - Latch onto something cultural you love

Fall in love with Russian literature and start wading your way through Crime and Punishment. Get obsessed with Hindi Bollywood movies, or Italian opera, or Japanese anime/manga. Research into your TL country's history in that foreign language. Binge Korean dramas or kpop idol interviews. Anything, as long as you're passionate about it.

Hope that helps, and let me know if you have any other ideas :)

Um lugar bem peculiar.

Esse é o meu estado mental.

Muito fofo.

Que belo.

source

É uma família bem unida.